Total Eugenol in Blends: How to Add It All Up

A formula can have one line on the sheet that says "eugenol" and still carry three times that much. Clove bud, clove leaf and cinnamon leaf oils are mostly eugenol, so every spice note in a blend adds to the total. Here is the arithmetic, start to finish, with one example you can copy into a spreadsheet.

Eugenol Oil bottle

Eugenol Oil

Our own Eugenol Oil, in sizes from 0.5 oz to bulk.

From $10.99

Shop Now →

If sums are not your favourite part of making things, you are in good company. The good news is that this is a one-time setup. Build the spreadsheet once, and every new blend becomes a few lines of typing and a glance at the total.

The method in one sentence

For each ingredient, multiply its weight by the eugenol fraction of that ingredient, add the results, and divide by the total weight. That is the eugenol percentage of your concentrate. Multiply it by your fragrance load and you have the eugenol in the finished product.

A 100 g example

The clove figures come from the batches described in EFSA's feed-additive opinion: bud oil averaged 75.06% eugenol by GC-MS and leaf oil 82.60% (EFSA FEEDAP Panel, 2023). For our eugenol oil we use 98% as a stand-in to show the sums; use the assay on your own lot's report in its place.

IngredientGramsEugenol fractionEugenol (g)
Eugenol oil (stand-in assay)4.00.9803.920
Clove bud oil6.00.75064.504
Clove leaf oil2.00.82601.652
Everything else, assumed eugenol-free88.000
Total100.010.076

That concentrate is about 10.1% eugenol, although only 12 g of it is a eugenol-bearing material. At a 3% fragrance load the finished product carries 0.30% eugenol. These numbers are for illustration and are not a recommended rate.

Running it backward against a limit

The more useful direction starts with the IFRA ceiling for your product and asks how much concentrate it allows. The ceilings in the IFRA Standards, 51st Amendment are 0.64% for body creams and lotions (category 5A), 2.5% for fine fragrance (4) and 4.9% for bar soap (9). Divide each by 10.076% and you get the most concentrate the product can hold:

The same blend, three very different allowances. That spread is why we suggest settling the product category before the recipe.

A habit we would pass on to any maker: add a column for "where did this number come from?" It is a small thing, but when you pick the sheet up again in six months, you will thank yourself for knowing whether 75% came from a report on your bottle or from a number you borrowed.

Where the inputs wobble

Natural oils move. The same seven bud oil batches in the EFSA opinion read 82.7% eugenol by GC-FID and 75.06% by GC-MS, simply because the instruments measure differently, and the panel's bud oil specification spans 67 to 85%. Swap those values into the 6 g of bud oil above and the concentrate lands at 10.5% (82.7%) or 9.6% (67%). If your margin to the limit is thinner than about ten percent, ask for a GC report on the oil you actually bought and use the highest plausible fraction when checking against a ceiling.

Cinnamon is the one that surprises people. IFRA's own annex to the eugenol standard lists indicative eugenol content of about 74% for cinnamon leaf oil but only about 2% for cinnamon bark oil (IFRA Eugenol Standard, Amendment 49, Annex I). Same spice, entirely different arithmetic, so write down which part of the plant the oil came from.

Name your blends sensibly

Give each version of a formula a plain name and a date, such as "Winter spice v3, March". Resist overwriting old rows. When a blend smells better than you remember, you can go back and see exactly what you changed, and when it smells worse, you can go back to the one that worked.

It also helps to print the sheet and tape it inside a cupboard door near the scale. Having the total in front of you while you weigh makes mistakes much harder to make.

A spreadsheet that does not mislead you

  1. Work in grams, not drops. If you start from volume, convert using density; the batch on our Certificate of Analysis is 1.065 at 20 C, so 1 mL weighs about 1.065 g.
  2. Keep the fraction in its own cell and note where it came from, a report or a paper.
  3. Do not round until the last step, then round the dose down.
  4. If a product has two uses, such as a candle that doubles as a wax melt, test it against the stricter category.

Our oil is an undiluted isolate, so its row is the easy one once you hold the assay for your lot. You can request that report in writing through the contact page, and our certificate guide shows what to look for. For where clove oil's own numbers come from, see our clove content article.

The sum is the easy part. A good sheet, with a document behind every number, is what lets you scale a formula without surprises.

Eugenol Oil bottle

Eugenol Oil

Eugenol Oil from our own shop, in sizes from 0.5 oz to bulk.

From $10.99

Shop Now →

Sources & Further Reading